Breakers

Today i would like to talk about replacing a breaker.If you do have a bad breaker(one that wont reset or is not getting voltage).First turn off your main breaker .Then turn off the breaker you want to replace.Remove your wire then put pressure on the breker to the off position .If it is in tight you may have to tap the breaker on the hande with a screw driver.Once you have the old breaker out then the new breaker should just push in.

(CAUTION)

Do not put in a bigger breaker than is aleady there.I hope this helps you out,and as always giveme a call if you have any questions John (361 433-6039)